What is Weld Neck Flange, Material Types, and Specifications
What is Weld Neck Flange?
What is
Flange? The weld neck flange (WN flange) has a neck that relocates the pipe’s
stress, thereby reducing the pressure collected in the flange bottom. This
product is compatible with pipelines that work in high- or low-temperature
conditions and bear high pressures. When the PN is greater than 2.5 MPa, it is
specially designed for the pipe or the valve.
Two
Shapes of Welding Neck Flange
A welding
neck flange with hub comes in two shapes, one that has a reducing neck,
referred to as a reducing weld neck flange manufacturers, and one that has a
typical long neck, referred to as a long neck weld flange. A welding neck
flange comes in two shapes, one that has a reducing neck, referred to as a
reducing weld neck flange weld, and one that has a typical long neck, referred
to as a long neck weld flange. Ss weld neck flange dimensions. Welded neck
flange, Weld Neck flanges, long weld necks, long weld neck flange.
Reducing
Weld Neck Flange
Due to
its name, it is like a combination of a pipe reducer and flange, so it could be
directly welded to a smaller pipe.
Long Weld
Neck Flange
Often
referred to as LWN flanges, the neck part resembles an elongated pipe with a
flange attached. As a result, it is typically used as a nozzle for a column or
barrel.
If you
need a heavy LWN flange with a larger thickness and a different shape, you can
choose from a normal thickness long welding neck flange.
Types of Flanges
Slip On flange.
Slip On flanges have a calculated strength of two-thirds that of
Welding Neck flanges, and their fatigue life is one-third as long as Welding
Neck flanges.
A flange is connected to a pipe by two filet welds, both on the
outside and on the inside.
Socket Weld flange
Initially, socket weld flanges were developed to be used on
small-sized high pressure piping. The static strength of these flanges is the
same as that of Slip On flanges, but their fatigue strength is 50% higher than
that of double-welded Slip On flanges.
In order to connect the pipe to the flange, there is one filet
weld at the outside of the flange. A space must be created between the pipe and
the flange or fitting prior to welding.
According to ASME B31.1 1998 127.3, Preparation for Welding (E)
Socket Weld Assembly.
Prior to welding, the pipe or tube should be inserted into the
socket to maximum depth and then withdrawn approximately 1/16″ (1.6 mm) away
from contact between the end of the pipe and the socket shoulder.
https://thesteelexporter.com/what-is-weld-neck-flange-material-types-and-specifications/
Comments
Post a Comment